Tryer Process Equipment

1730 City View Drive, Wichita Falls, Texas, United States | Oil & Gas

Tryer Process Equipment (TPE) provides engineering, detailed design and fabrication services and solutions to the oil, natural gas and gas separation industries.

The key personnel of the organization consist of:

  • Four Graduate Engineers with an average working experience of 20 years
  • A Production Manager with 35 years of experience
  • Two Mechanical Designers with an average working experience of 20 years
  • An Administrative Manager with 15 years of experience

Fabrication Shop Features

  • Approximately 10 acres of land of which 5 acres is paved with concrete.
  • The shop is a metal building 100’W X 400’L.  It has 40,000 sq. ft. of manufacturing area under roof.  The center bay of the shop is 60’W X 400’L and is served by two 25 ton and one 15 ton electric bridge cranes.  The two side bays, are each 20’W X 400’L.  Each side bay is served by two 5 ton electric bridge cranes.  Lighting for the manufacturing area is provided by forty-five 1,000 watt high bay metal halide fixtures.  The shop has heavy, 480 volt, 3 phase electrical service, and a compressed air system that will deliver 350 cfm at 110 psig.
  • Offices with 6,000 sq. ft. and a warehouse with 4,000 sq. ft.  Both offices and warehouse are attached to the main manufacturing building.  Also, a 600 sq. ft. tool room is attached to the main building.
  • The total area under roof is approximately 50,000 sq. ft. including the manufacturing, office and warehouse areas.
  • 30,000 gallon hydro-test water storage.
  • The fabrication facility is located at 3737 Old Iowa Park Road, Wichita Falls, TX 76306.
Company Details
Company NameTryer Process Equipment
Business CategoryOil & Gas
Address1730 City View Drive
Wichita Falls
Texas
United States
ZIP: 76306
PresidentNA
Year Established2008
EmployeesNA
MembershipsNA
Hours of OperationNA

Similar Companies